TOILET FLANGE
Read all instructions in this guide in order
to properly install the product.
SUPPLY
AS
REQ’D
SINGLE-FLUSH TOILET
!
RECOMMENDED TOOLS & MATERIALS
CAUTION: PRODUCT IS FRAGILE. HANDLE WITH CARE TO AVOID BREAKING AND INJURY.
NOTE: Illustrations may not correspond exactly to the shape of package components.
REMOVING OLD TOILET
a) Turn off the toilet supply valve and flush toilet completely. Wipe
any remaining from the tank and bowl with a towel or sponge.
b) Disconnect and remove the supply tube. NOTE: If replacing the
valve, shut off the main water supply first.
c) Remove the old mounting bolts, remove the old toilet, and plug
the floor waste opening to prevent sewer odours.
d) Remove the toilet flange bolts and clean the old wax, putty, etc.
from the base.
NOTE: The mounting surface must be clean and level before
installing the new toilet.
ROUGH-IN DIMENSIONS
NOTE: The distance between the wall and the centreline of the
toilet flange must be 12 in. (30.5 cm).
INSTALLING MOUNTING BOLTS
Insert the mounting bolts into the flange openings and slide them
into place parallel to the wall.
1
2
3
- 2 -
- Putty Knife
- Flathead Screwdriver
- Adjustable Wrench
- Sealant
- Tape Measure
- Hacksaw
- Wax Ring
- Flexible Supply Tube
- Mounting Bolts
- Level
12”
12”
FLOOR BOLTS
RETAINING WASHER
WAX RING
SEALANT
INSTALLING WAX RING
Invert the toilet on the floor (cushion to prevent damage) and
install the wax ring evenly around the floor drain with the tapered
end of the ring facing the toilet.
4
FINISHED WALL
FINISHED FLOOR
