x7
x4
Top
3
Insert locking pins to right side panel
Fit the end panel
Screw the 7 locking pins all the way into the
threaded holes. Do not overtighten or you may
damage the thread.
Insert 4 locking cams into the end panel.
Push each cam all the way into the hole.
Use the phillips key to rotate the locking
cams so the ‘+’ and ‘-’ face toward the end
of the panel.
Use the phillips key to tighten each
locking cam (turn clockwise to tighten).
phillips key
1
2
Top
Top
Note correct
way up
Fit the end panel to the side panel.
Use the phillips key to tighten the
locking cams.
Look at the illustration carefully - you
can identify the top of the side panel
because it has the cams closer to
the edge. Ensure the top of the end
panel matches with the top of the
side panel. If you try to attach the end
panel upside down the two edges will
not line up evenly.