manualshive.com logo in svg

TASKA Prosthetics Low Profile Wrist, Руководство по обслуживанию и уходу

Поделиться
Скачать
TASKA Prosthetics Low Profile Wrist Скачать руководство пользователя страница 3

do 

more

Components used

The following components are supplied with each Low Profile TASKA Hand. 
Replacement parts can be purchased from your local TASKA agent.

TASKA-LPLC-01 

Low Profile Wrist Lamination Ring

•  Knurled lamination area
•  6x notches for rotational 

lamination support

•  Grooved features for maximised 

bonding area to lamination.

152-08-061

Low Profile Wrist Set Screw

Used to secure the hand to 
the Lamination Ring. 1 extra is 
provided per hand.

152-20-014

Switch Block

This connects the Power Switch 
and up to 2 sensor inputs (EMG or 
otherwise) to the hand. 

See figure 3 for the correct  
wiring detail.

152-09-012 

Low Profile Wrist Masking Plug

Protects delicate components on 
the Low Profile Lamination Ring 
during the laminating process.

152-08-021

Low Profile Wrist O-Ring

This will come pre-assembled on 
the Low Profile Lamination Ring.

Replace if worn, damaged  
or missing to maintain a 
waterproof seal.

152-08-070

Low Profile Wrist Lubricant

Apply after laminating as per the 
following instructions to ensure 
the best possible performance of 
the product.

Low Profile maintenance and care guide    

4

3

    Low Profile maintenance and care guide

Содержание Low Profile Wrist









Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды