Task Force Tips ME0-TPGI Скачать руководство пользователя

Страница: 1 / 16

©Copyright Task Force Tips LLC 2002-2020

LIN-040 November 30, 2020 Rev15

TASK FORCE TIPS LLC

MADE IN USA · tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

G-Force

INSTRUCTION FOR OPERATION AND MAINTENANCE

MANUAL: METRO 0, 1, and 2

Fixed Gallonage Nozzles

WARNING

Understand manual before use. Operation of this device without understanding the manual and

receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/serial-

number.
This equipment is intended for use by trained and qualified emergency services personnel for

firefighting. All personnel using this equipment shall have completed a course of education

approved by the Authority Having Jurisdiction (AHJ).
This instruction manual is intended to familiarize firefighters and maintenance personnel with the

operation, servicing, and safety procedures associated with this product. This manual should be

kept available to all operating and maintenance personnel.

ME1-VPGI with Bail

Valve Handle

ME1-STO

Twist Valve

ME1-TO

Tip Only

ME2-BLITZ with Bail

Valve Handle

ME2-VPGI with Bail

Valve Handle

ME2-TO

Tip Only

USH

ME1-V with Bail

Valve Handle

ME2-V with Bail

Valve Handle

ME0-V with Bail

Valve Handle

ME0-VPGI with Bail

Valve Handle

USH

Metro 0

ME0-TPGI with

IMPULSE

Trigger Valve System

ME1-TPGI with

IMPULSE

Trigger Valve System

Metro 0

Metro 1

Содержание ME0-TPGI

















Результаты поиска

Содержание ME0-TPGI

Отзывы:

Похожие инструкции для ME0-TPGI

Бренды по названию

Популярные бренды

Task Force Tips ME0-TPGI, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание ME0-TPGI

Отзывы:

Похожие инструкции для ME0-TPGI

Бренды по названию

Популярные бренды