Task Force Tips ME0-TPGI Скачать руководство пользователя

Страница: 16 / 16

©Copyright Task Force Tips LLC 2002-2020

LIN-040 November 30, 2020 Rev15

TASK FORCE TIPS LLC

MADE IN USA · tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

11.0 OPERATION AND INSPECTION CHECKLIST

BEFORE EACH USE,

the nozzle must be inspected to this checklist:

1. There is no obvious damage such as missing, broken or loose parts, damaged labels etc.

2. Waterway is clear of obstructions

3. Coupling is tight and leak free

4. Valve operates freely through full range and regulates flow

5. “OFF” position shuts off fully and flow is stopped

6. Nozzle flow is adequate as indicated by pump pressure and nozzle reaction

7. Shaper turns freely and adjusts pattern through full range

8. Nozzle smoothly moves into full flush and out of flush with normal flow and pressure restored

9. Shaper detent (if so equipped) operates smoothly and positively.

BEFORE BEING PLACED BACK IN SERVICE,

nozzles must be inspected to this checklist:

1. All controls and adjustments are operational

2. Shut off valve (if so equipped) closes off the flow completely

3. There are no broken or missing parts

4. There is no damage to the nozzle that could impair safe operation (e.g. dents, cracks, corrosion or other defects)

5. The thread gasket is in good condition

6. The waterway is clear of obstructions

7. Nozzle is clean and markings are legible

8. Coupling is retightened properly

9. Shaper is set to desired pattern

10. Shutoff handle is stored in the OFF position

NFPA 1962: Standard for the care, use, inspection, service testing, and replacement of fire hose, couplings, nozzles and fire hose appliances. Quincy, MA: National Fire

Protection Agency

WARNING

Equipment failing any part of the checklist is unsafe for use and must have the problem corrected

before use or being placed back into service. Operating equipment that has failed the checklist is a

misuse of this equipment.

Содержание ME0-TPGI

















Результаты поиска

Содержание ME0-TPGI

Отзывы:

Похожие инструкции для ME0-TPGI

Бренды по названию

Популярные бренды

Task Force Tips ME0-TPGI, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание ME0-TPGI

Отзывы:

Похожие инструкции для ME0-TPGI

Бренды по названию

Популярные бренды