Unitech Group
17
TASHI Smartech Co., Ltd. Unitech Group
3F., No. 188, Baoqiao Rd., Xindian Dist., New Taipei City 231,Taiwan, R.O.C.
Tel: +886-2-8912-1268 Fax: +886-2-2911-3918 TASHI Website:
www.tashi.ute.com
2. Connect the Ethernet, the Communication Cable (8 pins) and the
Relay Cable (3 pins)
.
3. Fit MT390S onto the outside on-wall kit/on-wall kit by aligning the hooks (the outside on-wall
kit/on-wall kit) to the mounting holes (the rear side of MT390S), and then lift MT390S vertically
upwards and push to the end.
4. Tighten the screw as shown below. Using other kinds of screw will result in unrecoverable damage
and void the warranty.
Altitude
Due to the wide-range camera is used in the MT390S (the horizontal angle is 91° and the vertical angle
is 47°), the altitude of the installation should be considered carefully.
Condition 1: Outside on-wall kit
It is suggested that the distance between the top of the outside on-wall kit and the ground is about
174cm.
Communication Cable
(8 pins)
Mounting Hole
Relay Cable (3 pins)
Ethernet
