Taser TASER CAM, Руководство по эксплуатации

Страница: 10 / 48

TASER CAM HD Recorder
MMU0036 Rev: A Page 10 of 48
The AS recorder provides an audible beeping alert for the last two seconds of
a trigger-activated firing cycle before automatically shutting down the cycle.
After 5 seconds’ deployment duration, the energy burst will stop even if your
finger is still pulling the trigger switch. To reenergize the deployed cartridge,
first ensure that your finger is off the trigger switch, and then press the ARC
switch.
Note: The TASER CAM HD AS recorder has no impact on the ARC switch
functionality and will not prevent the user from energizing the X2 ECD
with the ARC switch. Nor will the TASER CAM HD AS shut down the
high voltage output of the ECD at any predetermined time when the
user continuously holds down the ARC switch.
Note: TASER CAM HD AS feature has no impact on video and audio
recording; however the audio alert will be captured on the recording
and may distort any audio captured from the incident during the
duration of the audio alert. As long as the safety switch is in the up
(ARMED) position, the TASER CAM HD AS will continue to capture
the event.
Under stressful situations, audio exclusion might prevent you from
hearing the alert from the automatic shut-down TASER CAM HD
recorder.
Your ECD recognizes the TASER CAM HD AS as a unique type of battery
pack which enables the automatic shut-down feature of the ECD. The ECD
will indicate that this feature is enabled via a special TASER CAM HD AS
icon in the upper left hand corner of the ECD CID as shown below:
This feature is automatically disabled if replaced by another battery pack
type, and the X2 ECD will return to its normal configuration (that is, there will
no longer be an audio alert, and the energy cycle will continue after 5
seconds if your finger is still holding down the trigger switch). Always confirm
that the ECD performs as expected before returning it to duty after changing
any battery pack.