Page 17 of 22
This will allow the bracket to be placed onto the screws and settle in the
keyhole (the holes in the bracket are shaped like keyholes to make it easier
to adjust the mount’s position on the wall).
2.e
Repeat steps 2.a–2.d for the other side of the mount bracket.
2.f
After the Wall Mount Bracket is positioned correctly, tighten all of the screws.
3.
Go to
Step 6: Connect the Cables
.
Step 5:
Attach the Wall Mount Bracket to the Wall (Drywall mount)
Your EVIDENCE.com Dock Wall Mount Kit comes with hardware for mounting the
bracket to a stud or mounting directly into the drywall. If you are installing the
bracket to a wall stud, go to
Step 4: Attach the Wall Mount Bracket to the Wall (Stud
mount)
.
Note:
Use the screw-in anchors and shorter screws for drywall installation.
1.
Find the location where you want to mount the Wall Mount Bracket.
2.
Locate the EVIDENCE.com Wall Mount Bracket on the wall.
2.a
Use a level to ensure the bracket is level before marking the holes.
2.b
Mark the center of the 4 keyholes on the wall.
2.c
Remove the Wall Mount Bracket and screw in the drywall anchors in each
location.
2.d
Screw in each of the screws until there is 1/8” (3.2 mm) of space between the
bottom of the screw head and the wall.
2.e
This will allow the bracket to be placed onto the screws and settle in the
keyhole.
2.f
After the Wall Mount Bracket is positioned correctly, secure all of the screws.
Step 6:
Connect the Cables
1.
There is space provided on the horizontal shelf to secure the power supply for
the EVIDENCE.com Dock.
1.a
Position the power supply between the slots in the bracket and secure the
power supply to the bracket with the VELCRO strap.
1.b
Route the barrel connector around the edge guard and plug the barrel
connector into the power jack on the Dock.
1.c
You can secure the cable in position with the attached zip tie and the
associated slots in the bracket.
1.d
Plug the power supply cable into a power strip or nearby AC outlet.
