12
13
LOCATING DEAD CIRCUITS
a dead circuit caused by a tripped breaker can be located by fol-
lowing the circuit’s neutral line. connect power from any energized
line and return it through the neutral of the dead circuit. You can
then trace the neutral wire to the panel.
notE: You may also find the source or hot wire breaker with this
process, however, the same panel will likely contain both circuits. to
verify this, remove the panel trim and test the neutral wire.
FINDING SHORTS TO GROUND
typical configuration is shown below. confirm that the transmit-
ter lED is flashing then follow the wire until the signal disappears,
indicating the location of the short.
TOLL FREE CUSTOMER SERVICE
1.800.999.9952
TRANSMITTER
BATT
TO ANY HOT
OR BATTERY
TO NEUTRAL
USE CLIP LEAD AND AC BLADE ADAPTER
DEAD
CIRCUIT