Tasco 119270CW, Инструкция по эксплуатации

Страница: 11 / 44

11
continuously. After it stops blinking, the PIR sensor is active,
and any motion that is detected by it will trigger the capture of
photos or videos as programmed in Setup Mode. Be sure you
have read the camera Setup Mode section. Please note, the
PIR is strongly sensitive to ambient temperature. The greater
the temperature difference between the environment and your
subject, the farther the possible sensing distance.
Before leaving the camera unattended, please check for the
following:
• Are the batteries inserted with correct polarity and is their
power level sufficient?
• Does the SD card have sufficient available space and is
its write-protection (lock) switch off?
• Is the Power switch in the
ON
position? (do not leave it
set to
AIM
).
SAVING/VIEWING THE FILES ON YOUR COMPUTER
After you have setup, mounted and activated your Tasco Trail
Camera
,
you will of course be eager to return later and review
the images it has captured for you. The best way to do this is
to switch the camera
OFF
and remove the SD card so you
can take it home to download and review your photos/videos at
leisure. To continue using the camera, simply insert another SD
card (format it first in the Setup Mode menu if necessary, after
making sure you have backed up any files you want to keep
that are left on a previously used card) and switch the camera
back
ON
. The time/date and other settings made in Setup Mode
will remain unchanged as long as the batteries remain in the
camera and provide adequate power for it to operate.
Downloading and Reviewing Files From the SD Card
Insert the SD card you removed from your
camera into the SD card slot of your computer
if it has one, or the SD slot of a USB card reader
accessory (follow the directions provided by the
manufacturer). Depending on the computer’s
operating system, the SD card’s icon and name
will then be visible on your desktop, under
“Devices with Removable Storage” in “My
Computer” or in a list of drives and connected
devices. Double click the SD card or card
reader’s icon to open it and view the file names
Fig. 13