1 – Introduction
TASCAM US-2400
Owner’s Manual
7
POWER indicator, etc.
Connect the DC connector from the power adapter to
the
DC IN
connector on the rear of the US-2400.
Connect the supplied AC power cable to the appro-
priate inlet of the power adapter.
Connect the plug of the supplied AC power cable to
your AC outlet.
To the right of the USB indicator is a
POWER
key
which pulses when the unit is in standby mode and
lights steadily when the unit is powered up.
When the US-2400 is first connected to the power it
turns on and the key lights steadily.
Press
POWER
to put the unit into standby mode (the
key pulses).
Press any key (including
POWER
) in standby mode
to turn the US-2400 on again.
Rear Panel
On the rear panel are connections for the included
power supply, USB, and a footswitch which may be
used for hands-free punching.
Computer Requirements
The US-2400 takes advantage of the audio/MIDI ser-
vices already built-in to the Mac OSX and Windows
XP operating systems. This allows the US-2400 to be
automatically recognized by those operating systems,
and become available to a DAW without the need to
install additional driver software.
Any computer capable of running these operating
systems will function with the US-2400. One avail-
able USB port is required.
NOTE
The US-2400 is a high-bandwidth USB device and should
not share a USB port with other devices. Connecting
other devices to a USB port with the US-2400 may
degrade its performance.
Macintosh OS X
The US-2400 requires Mac OS X 10.2.8 or greater,
including 10.3 (Panther). Free updates to OS X
10.2.8 from earlier versions of 10.2 are available
from the Apple Computer Web site.
Mac OS 9 does not include the built-in audio/MIDI
services required for the US-2400.
Windows XP
The US-2400 requires the use of Windows XP. We
recommend that you install the latest Service Pack
available to take advantages of the latest improve-
ments in the OS MIDI and audio services.
Other versions of Windows do not include the built-
in audio/MIDI services required for the US-2400.