10 - Snapshots
TASCAM TM-D1000 Operations Manual
28
1
Press and hold down the
ESCAPE/RECALL
key and press the
CH SEL
key whose channel
number corresponds to the snapshot number
that you want to recall.
Only the first 16 user snapshots can be recalled in
this way.
NOTE
If the Direct Recall Defeat feature is set to
On
(see below), this feature is not available.
10.5.1Direct recall defeat
To avoid accidental recall of snapshots, the TM-
D1000 provides a “safety” (defeat) mode.
1
Press and hold down the
SHIFT
key and press
the
OPTION
key to enter the
Option
screen.
2
Turn the
DATA ENTRY
knob until the bottom
line shows
System
, and then press
ENTER
.
3
Turn the
DATA ENTRY
knob until the bottom
line shows
Direct Recall
Defeat
, and press
ENTER
:
4
Select
Yes
(direct recall is enabled) or
No
(direct recall is disabled) by turning the
DATA ENTRY
knob, and press
ENTER
.
D i r e c t
R e c a l l
D e f e a t
Y e s
