Tascam Sonicview 16 Скачать руководство пользователя страница 148

Страница: 148 / 188

9 – Various information displays

Sonicview 16/24 Error Screen SYSTEM error/alert message list

Error/alert type

Message

Meaning

Note

System Clock Error

“Master clock name” clock has no

signal. Switched to Internal.

There is no signal from the master

clock.

Master clock name:
WORD
Dante
SLOT 1 (slot signal type)
SLOT 2 (slot signal type)

Slot signal types:
AES, Dante, MADI

“Master clock name” clock is

unlocked. Switched to Internal.

The master clock is unlocked.

“Master clock name” clock regained.

The master clock has been

regained (locking is possible

again after becoming unlocked).

“Master clock name” clock regained.

Can be re-synced to “Master clock

name”.

The master clock has been

regained (locking is possible

again after becoming unlocked).
(message that appears at the top

of the screen)

“Master clock name” clock is locked. The master clock is locked.

Slot Card Error

SLOT [slot number] [card name] was

removed.

The expansion card was removed. Slot number: 1/2

Card name:

IF-AE16 (AES)

IF-AN16/OUT (Analog Out)

IF-DA64 (Dante)

IF-MA64/BN (MADI)

IF-MA64/EX (MADI)

SLOT [slot number] [card name]

failure.

Trouble was detected with the

expansion card.

Internal Dante Error

Dante Module Unavailable.

The built-in Dante module is in

an unusable state (in safe mode/

updating).

Dante Module Available.

The built-in Dante module is in a

usable state.

Device Temperature Error

SYSTEM is too HOT.
Increase FAN speed.

The internal temperature of the

unit has risen.
Increase the speed of the cooling

fan.

CPU is too HOT.
Increase FAN speed.

The temperature of the CPU has

risen.
Increase the speed of the cooling

fan.

DSP is too HOT.
Increase FAN speed.

The temperature of the DSP has

risen.
Increase the speed of the cooling

fan.

SYSTEM is too COLD.

The internal temperature of the

unit is too low.

CPU is too COLD.

The temperature of the CPU is

too low.

DSP is too COLD.

The temperature of the DSP is

too low.

SYSTEM temperature normal.

The internal temperature of the

unit has returned to the proper

range.

CPU temperature normal.

The temperature of the CPU has

returned to the proper range.

DSP temperature normal.

The temperature of the DSP has

returned to the proper range.

Cooling FAN Error

Cooling FAN failure.

The cooling fan has stopped.

Cooling FAN in motion.

The cooling fan has started

moving.

148

TASCAM Sonicview 16/Sonicview 24

Содержание Sonicview 16





























































































































































































Результаты поиска

Содержание Sonicview 16

Отзывы:

Похожие инструкции для Sonicview 16

Бренды по названию

Популярные бренды

Tascam Sonicview 16, Справочное руководство

Результаты поиска

Содержание Sonicview 16

Отзывы:

Похожие инструкции для Sonicview 16

Бренды по названию

Популярные бренды