Tascam MX-8A, Руководство пользователя

Страница: 12 / 68

12
TASCAM MX-8A
Specifications
General
FORMAT
44.1 k/48 kHz
,
16 bit/24 bit
Input/output ratings
USB port
Connector: 4-pin USB B-type
Transfer rate: USB 2.0 High Speed (480 Mbps)
ANALOG IN connectors
Connector: Euroblock (balanced) 3.81 mm pitch
Minimum input level: -77.5 dBu
Maximum input level: +26 dBu (MIC)
Maximum input level: +24 dBu (LINE)
Input impedance: 2.2 kΩ or higher
ANALOG OUT connectors
Connector: Euroblock (balanced) 3.81 mm pitch
Nominal output level:
+4 dBu (when Ref.Level set to other than -9 dBFS)
+6 dBu (when Ref.Level set to -9 dBFS)
Maximum output level (switchable):
+15 dBu (Ref.Level: -9 dBFS)
+18 dBu (Ref.Level: -14 dBFS)
+20 dBu (Ref.Level: -16 dBFS)
+22 dBu (Ref.Level: -18 dBFS)
+24 dBu (Ref.Level: -20 dBFS)
Output impedance: 200 Ω or lower
RS-232C connector
D-sub 9-pin (female, inch-standard)
RS-485 connector
Connector: RJ-45
Cables: category 5e or faster STP cables
Ethernet connector
Connector: RJ-45
Transmission protocol: TCP/IP
Ethernet standard: 100BASE-TX
Cables: category 5e or faster STP cables
0
0 dBu=0.775 Vrms
Audio performance
Mic amp EIN (equivalent input noise)
-126 dBu or less (MIC IN
w
LINE OUT, Input impedance: 150 Ω,
22 kHz LPF, A-weighted, JEITA)
Frequency response
±0.5 dB: 20 Hz – 20 kHz
(+24 dBu input, MIC IN
w
LINE OUT, GAIN MIN, JEITA)
Distortion (THD+N)
0.005 % or less
(+24 dBu input, 1 kHz, MIC IN
w
LINE OUT, GAIN MIN,
JEITA)
S/N ratio
106 dB or higher
(+24 dBu input, 44.1 k/48 kHz sampling frequency, MIC IN
w
LINE OUT, GAIN MIN, JEITA)
Crosstalk
106 dB or higher
(+24 dBu input, 1 kHz, MIC IN
w
LINE OUT, GAIN MIN,
JEITA)
Dynamic range
106 dB or higher
(MIC IN
w
LINE OUT, GAIN MIN, JEITA)
Note: JEITA indicates compliance with JEITA CP-2150
Other
Power
AC100-240 V, 50/60 Hz
Power consumption
21 W
Dimensions
483 × 45 × 304.1 mm (W x H x D, including protrusions)
Weight
3.0 kg
Operating temperature range
0°C–40°C
0
See the back of this manual for dimensional drawings and lev-
el and block diagrams.
0
Illustrations in this manual might differ in part from the actual
product.
0
Specifications and external appearance might be changed
without notification to improve the product.