TASCAM MiNiSTUDIO CREATOR
7
8
Setting up the unit
NOTE
For details about the
IN
1
jack (
1
) and other
parts, see “Top panel” on page 8 and “Front
3. Set the CREATOR/BROADCAST switch (
o
) to
BROADCAST.
4. Confirm that the IN
1
VOLUME knob (
4
) is set
to MIN before connecting a mic.
i
Connect a condenser or dynamic mic to the IN
1
jack (
1
).
i
When using 4-pole headphones with a built-in
mic, connect it to the headphones jack (
y
).
i
When using the headset, connect the
headphone plug to the headphones jack (
y
)
and the mic plug to the mic jack (
u
).
5. Set the mic type switch (
5
) for the IN
1
jack (
1
)
according to the type of mic connected to it as
follows.
Condenser mic (mic that requires power)
Dynamic mic (mic that does not require
power)
NOTE
When using 4-pole headphones with a built-in
mic or a headset, you can set this to either or
.
6. Say or sing something, and turn the IN
1
VOLUME knob (
4
) until the LEVEL meter (
2
)
lights green.
7. Confirm that the headphone knob (
6
) is
set to MIN, and connect headphones to the
headphone jack (
t
).
When using this unit for a live broadcast, in
order to prevent feedback (signal looping), use
headphones or an earphone instead of speakers.
8. If you want to apply reverb to your voice, turn the
REVERB knob (
0
).
9. Press the ON AIR button (
e
) so that it lights to
complete preparation.
Audio will start being sent to the computer, so
make the settings in the streaming software to
start streaming.
Start live broadcasting.
CAUTION
Refer to the help pages of the streaming
software to make various settings in it.
Refer to the following pages to use the other
functions of this unit.
Desired action
Page
Use voice effects
Play background music on the
computer (Windows Media Player/
iTunes)
Play sound effects (PON trigger
function)
Use with an iOS device (connecting) page 13
Use with an iOS device (powering)
Use music on a tablet or other
connected device
i
Using the unit as an audio interface
(music and video creation)
o
