HS-4000
Release Notes
8
TASCAM HS-4000
•
In dual playlist mode, PARALLEL port PLAY B and STOP
B commands did not function. This has been fixed.
•
In timeline mode, after setting the maximum number
of marks (99) and then deleting some of these marks,
new marks would all be named with the number “99”.
This has been fixed.
•
Even if the
REMOTE/KEYBOARD
section was set
to
LOCK
, the RC-HS32PD
FADER START
key still
functioned. This has been fixed.
•
In on-air mode, if you switched the CF card when no CF
card was loaded, the status of the unselected CF card
slot would become “
No Project
” (card loaded but
has no project) rather than “
No Media
”. This has been
fixed.
•
Touching the
CURRENT
button on the
Playlist Ad-
just
screen did not always load the current time. This
has been fixed.
•
If an error occurred when importing an AES31 file, an
error warning was not always given. This has been
fixed.
•
In playlist mode, after setting a mark when paused,
switching to the
Adjust
screen would cause this mark
information to be lost. This has been fixed.
•
When a project containing a mono folder that was
created on an HS-P82 or HS-8 was loaded some files
might not be shown when in on-air mode. This has
been fixed.
•
Operation stability has been improved.
V1.22 fixes
•
If loading a file fails during playback in timeline mode,
playback will continue with silence instead of stopping.
•
If PreRec was ON and recording was started from
“00:00”, recording would stop and a “
RECORD
stopped. ABS time is over 24h
” pop-up
message would appear. This has been fixed.
•
When recording with the
SYNC T/C
screen
SETUP
page
TC GEN MODE
item set to
REGEN
or
JAM SYNC
,
the precision of the start time added to the file at the
time of recording has been increased.
•
When the
SYNC T/C
screen
SETUP
page
TC GEN
MODE
item was set to
TIME OF DAY
, if the unit’s
internal clock was adjusted, the time code generator
did not chase the time after the adjustment. This has
been fixed.
•
When a PPL file is imported, even if there are
mismatched entries (entries with missing files), the
remainder of the entries are now properly registered.
•
In some cases, marks could not be added to files that
had not been created by this unit. This has been fixed.
•
When reconfirmation pop-up messages for various
operations appeared on the
CF Manage
screen, the
physical key bindings were reversed. Pressing the
ENTER
key would cancel the operation, and pressing
the
EXIT/CANCEL
would execute the operation. This
has been fixed.
•
Pop-up messages would not disappear in some cases.
This has been fixed.
•
In dual playlist mode, when changing operation mode,
for example, before the playlists had been saved, saving
was confirmed for the A and B playlists separately. Now
saving both A and B playlists is confirmed at the same
time.
•
If you use a
e
button on the
PROJECT
screen to load
a project with a different Sampling Rate or Timecode
setting, the values shown for the
Total Time
and the
Take Length
of the session were incorrect. This has
been fixed.
•
If the root directory of the CF card contained many
files, the firmware update screen might not correctly
show the available update files. This has been fixed.
•
In take mode, only one retake could be conducted. This
has been fixed.
•
Online playback has been fixed, so that locate
commands can no longer be received.
•
BC$ marks at the beginnings and ends of files might
not function with BWF-J. This has been fixed.
•
When the
PLAY SETUP
screen
CONTROL
page
Auto
Cue
setting is ON, pressing the
PAUSE
key when
stopped at the beginning of a take will now start Auto
Cue search.
•
After changing the name of a project, RC-HS32PD keys
would not show the take names. This has been fixed.
•
When changing the operation mode after formatting a
CF card, the CF card remain time display on the Home
Screen would not show
No Project
. This has been
fixed.
•
In dual playlist mode, when loading a CF card that
did not contain any project or session, the indicator
at the side of the CF card slot would continue to blink
and creating a new project or session would not be
possible. This has been fixed.
•
After loading a project that did not contain any
sessions, the color display and RC-HS32PD keys would
continue to show the project and session information
from before loading. This has been fixed.
•
When importing an AES31 file, if the designated region
size is longer than the audio file, the extra time will
now be added as silence.
•
The following setting values had been saved in CF card
project setting files. They are now saved to the unit’s
built-in memory instead.
• OUTPUT 1-4 SOURCE
• PLAY INHIBIT TIME
• MASTER T/C
• FADER MODE
• FADER START MODE