HS-4000
Release Notes
6
TASCAM HS-4000
V1.50 fixes
•
In On Air mode, if the time display mode was T/C,
locating would not occur on a timecode basis. This has
been fixed.
•
On the NEXT TAKE NAME screen, after take number
998 was recorded, if you tried to record the next take,
“Cannot RECORD. Take Limit Reached. Please change to
another Session.” would appear in a pop-up message
and recording would fail. This has been fixed.
•
In dual playlist mode, if you switched to the Player
A ADJUST screen while Player B was playing, when
you returned to the Home Screen, the time counter
of Player A would move even though that player was
stopped. This has been fixed.
•
Mark names could not be shown from WAV files made
in Logic Pro 9. This has been fixed.
•
In playlist mode, after rebuilding, even after the pop-
up message disappeared, flash keys would not respond
to operation for a little while. This has been fixed.
•
In playlist mode, when using the
.
and
/
buttons on the ADJUST screen to change the entry to
be edited, mark information would not be shown. This
has been fixed.
•
Current Project/Session information within WAV file
iXML information was incorrect. This has been fixed.
•
In playlist mode, if the PREVIEW button on the ADJUST
screen was set to OFF, after changing the Fade Out
Length the stop position was incorrect. This has been
fixed.
•
On the Playlist selection screen, after turning the MULTI
SELECT button on, if you switched to the IMPORT PPL
screen, the IMPORT [
e
] button would be disabled and
importing would not be possible. This has been fixed.
•
During recording with Confidence Monitor set to OFF,
even if you turned input monitoring ON for tracks with
recording OFF, you would not be able to hear sound
from the audio input jacks. This has been fixed.
•
In timeline mode, synchronization error marks (UNLKxx)
were not added to WAV files. This has been fixed.
•
The stability of operation has been improved.
V1.40 fixes
•
The fader volume setting of a connected RC-HS32PD is
now effective even when no CF card is loaded.
•
In order to prevent accidental operation, the response
speed of RC-HS32PD
FADER START
keys has been
slowed to 200 ms.
•
When creating a new project, instead of using the
currently set value for the
T/C Frame Type
setting, a
default value of
29.97DF
is always used now.
•
The following settings are now saved in the unit itself
rather than in a file.
• Track Record Arm
• Input monitoring
• Monitor pan
• Keyboard type
• Monitoring position (
PreFader/PostFader
setting on
MIXER SETUP
screen
MONITOR MIXER
page)
•
On the Home Screen in timeline mode, when the
TIMELINE Rec Tracks setting is 2tr or 3tr for a session,
the region display area and meter numbers of unused
tracks appear dimmed, making the number of active
tracks easy to see.
•
When a CF card that did not contain any projects was
inserted and loaded as the current CF card, backup
values (including Factory Preset values) were not
reflected on the screen. This has been fixed.
•
If a Project/Session folder created on a computer
containing a mixture of 44.1kHz and 48kHz WAV files
was loaded, the unit’s sampling frequency would
become 44.1 kHz and the project sampling frequency
would become 48 kHz, causing errors during playback.
This has been fixed.
•
In playlist mode, after executing a CF COPY command,
regardless of whether or not any entry had been
added, the stopped entry number would change to
100, and the RC-HS32PD entry button display would
become unlit. This has been fixed.
•
When playing back takes recorded in take mode,
playback errors could occur depending on the
recording function settings used during recording. This
has been fixed.
•
While recording in take mode, the total remaining time
shown was rounded to less than 24 hours. This has
been fixed.
•
If a CF card formatted by a computer was inserted in
the non-current slot, touching the OK button on the
pop-up message that appeared requesting that you
format the card caused the CF card in the current slot
to be formatted instead by mistake. This has been
fixed.
•
In versions before 1.40, when changing the setting of
the
FADER MODE
item on the
GENERAL
page of the
REMOTE SETUP
screen from
Disable
to
Enable
,
the volume would not change until the fader on the
external remote control was moved. From version 1.40,
this has been fixed so that when this setting is changed
the volume is set to match the actual position of the
external remote control fader.
•
In timeline mode, depending on the Start Time, AES31
editing data files were not always imported correctly.
This has been fixed.
•
If an AES31 editing data file that did not contain any
events was imported, the timecode frame type was
forcibly changed to 29.97DF. This has been fixed.