Tascam DR-07, Быстрый старт

Страница: 11 / 32

11
TASCAM DR-07
2–Preparation
Inserting an SD card
Since this unit uses an SD card for recording and
playback, you must insert an SD card before use.
NOTE
When new, this unit comes with an SD card
inserted. This card can be used for recording
and playback as is. There is no need to reinsert
or format it.
The SD card slot and the USB connector are under
the cover on the left side panel.
Press the cover down in the direction of the arrow
to open it. Insert the included SD card in the SD
card slot and push it until it clicks fully into place.
If you try to force the SD card in the wrong way,
the slot and the card could be damaged, so please
use caution.
CAUTION
Do not remove the SD card when the unit’s
power is ON, or when the unit is connected to
the computer by USB. Make sure the unit power
is OFF before you remove the card.
NOTE
If you install a new SD card or an SD card that
has been used with a device other than this unit, a
screen appears that recommends formatting. Press
the
Á/π
key to format the card.