Tascam CD-D11U, Руководство пользователя

Страница: 28 / 32

Audio Editing
20 TASCAM CD-D11U User’s Manual
Appendix C. About CD-R and CD-RW Discs
This appendix explains how to handle, load, and eject CD-R and CD-RW discs.
Handling Discs
❑
Handle compact discs only by their edges to avoid getting fingerprints on the
surface. Do not touch the disc’s data surface (unlabeled side).
❑
Do not place discs in direct sunlight, or in locations subject to high humidity,
high temperatures, or dusty conditions.
❑
If cleaning the disc becomes necessary (erratic operation or visible dust or
smudges), gently wipe the surface of the disc from the center to the outside
edge. Do not use benzene, alcohol, thinner, or other solvents.
Figure 6. How to Handle Compact Discs (CD-R and CD-RW)
Loading and Ejecting Discs
To load a disc into the source or target drive, first open the disc tray by pressing
the Eject button on the front of the drive. Place the disc on the disc tray with its
label side facing up. Then press the Eject button again to retract the disc tray back
into the drive.
To eject a disc from source or target drive, press the Eject button on the front of
the drive to extend the disc tray. Remove the disc from the disc tray and place it
in its protective case. Then press the Eject button again to retract the disc tray back
into the drive.
wipe disc surface from
center to outside edge handle discs
by their edges