Seam-sealing
Please refer to the seam-sealing instructional video:
http://www.tarptent.com/ttvideos.html
Seams over your living space must be sealed with a silicone-based sealer. An
inexpensive product is GE Silicone II clear sealer, available at most hardware
stores in a squeeze tube. In a well-ventilated location, squirt about 3 table-
spoons into a tuna can and mix in about 6 tablespoons mineral spirits (paint
thinner) or Coleman fuel/white gas. The silicone will dissolve and form a
semi-viscous solution. Set up the tent and seal all seams over the living space.
Paint the solution on with a small foam brush or rolled up paper towwl for easy,
smooth application. Add more mineral spirits and stir if the solution gets too
thick.
Condensation and Sag
Ventilation and fabric warmth are your best defenses against condensation.
Keep the netting open if at all possible and try to set up where it’s breezy. Keep
the beaks open (or at least partially rolled up). Camp under trees where its
warmer and set up out of river valleys and lake basins where it’s cool and damp.
Nylon stretches (and sags) when the humidity goes up. This happens as night is
falling and/or when it starts to rain. Use the line tighteners to tighten the fabric.
Key points to consider
• It’s a good idea to paint lines of silicone on the floor—slightly thicker
mixture than for the roof—to form an anti-skid mat.
• Push, rather than pull, the poles through the sleeves to prevent separation.
• The tent is made of strong, lightweight, and flammable fabric. Treat it
accordingly. It will resist much stress but neither flame nor abrasion.
Thank you for your purchase and we sincerely hope that you enjoy your
Tarptent. Feedback is always welcome.
Tarptent
12213 Koswyn Ct.
Nevada City, CA 95959 USA
e-mail: [email protected]
ph: 650-587-1548
