TAROT
@2016 TAROT All Rights Reserved.
1
4
VI. Troubleshooting
Angle is not level.
1. Error of sensors is too large.
2. Tx is not centered.
1. Calibrate sensors.
2. Center the Tx.
Gimbal vibrates.
1. The camera is not screwed down.
2. Motor torque is too large.
1. Screw down the camera and lens screws.
2. Decrease motor torque value slightly.
Image of the video is
not stable enough.
1. Vibration is too large;
2. Damping ball is not fixed.
3. Motor torque is too small.
1. Reduce the vibration of the multi-rotors;
2. Tightly fix the damping balls.
3. Slightly increase the value of motor torque.
Red
light
blinks
quickly.
1. Connection cable between gimbal
controller and its main body becomes
loose.
2. Gimbal stall protection goes far
beyond ten times.
1. Check and fix the wiring cables;
2. Make sure whether or not there is resistance to
gimbal rotation. Then, power cycle the gimbal.
