Fig. 3 open the transmitter
Fig. 4 insert the batteries
Fig. 5 assemble the transmitter
• Assemble the transmitter as fig. 5.
6.3 Reception of the water transmitter values
• After the receiver inserted batteries, the symbol is flashing to
search water transmitter signal for 3 minutes till it receive the sig-
nal then the symbol will be stopped flashing, the default chan-
nel is CH1.
• In this 3 minutes insert the batteries to water transmitter and as-
semble it, then the water transmitter will transmit signal to receiv-
er, and the red led flashing, the receiver receive the signal and dis-
play the value on the display.
Open
Screw cover
Transparent cover
silicone seal ring
LCD, PCB cover
Battery holder
Body
Temperature sensor inside
Assemble battery holder
Assemble
PCB cover
Note these two places must be
aligned!
Assemble transparent cover
Assemble silicone seal ring
Assemble screw cover
Close
Fig. 6 channel &
°C/°F switch
320281_vesilämpömittari_ko_EN_FI-SV-ET-LV-LT-RU.indd 2
320281_vesilämpömittari_ko_EN_FI-SV-ET-LV-LT-RU.indd 2
12.8.2020 8.20.33
12.8.2020 8.20.33