MFJ-1792/1793 Instruction Manual
Vertical Antenna
5
SAFETY PRECAUTIONS!!
1.) THIS ANTENNA IS AN ELECTRICAL CONDUCTOR.
2.) ANY CONTACT BETWEEN THE ANTENNA, FEEDLINE OR
SUPPORTING STRUCTURE AND POWER LINES WILL RESULT
IN DEATH OR SERIOUS INJURY.
FOR SAFETY PLEASE:
1.) DO NOT INSTALL THIS ANTENNA WHERE THERE IS ANY
POSSIBILITY OF CONTACT WITH UTILITY LINES.
2.) DO NOT LOCATE THE ANTENNA SUPPORT WHERE IT CAN
CONTACT POWER LINES IN THE EVENT OF MECHANICAL
FAILURE OR ACCIDENT.
3.) FOLLOW THE GUIDELINES FOR ANTENNA INSTALLATION AS
RECOMMENDED BY THE US CONSUMER PRODUCT SAFETY
COMMISSION.
MFJ-1792 PARTS LIST
- One 1 1/2" x 6' 6061-T6 Aluminum tubing
- One 1 3/8" x 6' 6061-T6 Aluminum tubing
- Two 1 1/4" x 6' 6061-T6 Aluminum tubing
- One 1 1/8" x 6' 6061-T6 Aluminum tubing
- One 1 1/8" x 55" 6061-T6 Aluminum tubing
- Two 1 3/8" x 1' 6061-T6 Aluminum Couplers
- One 1 1/4" x 1' 6061-T6 Aluminum Coupler
- Three 3/8" solid rods (one 55" threaded, and two untreaded 6') for 20 meter element
- One fiberglass 80 meter loading coil assembly with 7 x 27" spokes
- One Angle Bracket to support 20 meter element
- One fiberglass 1 1/4" x 16" solid rod for base mounting
- One Aluminum base mount with matching coil on fiberglass form (attached)
- Two Aluminum guy wire mounts
- Three bags of hardware; including:
HARDWARE BAG #1
[ ] Nine Hose Clamps
[ ] Two Guy Wire Mounts and Clamps
[ ] Three U-Bolt Kit For 1 1/2" Mast
HARDWARE BAG #2
[ ] Eight 1/4-20 x 1 3/4" Bolts
[ ] One 1/4-20 x 2" Bolt
[ ] Seven 6-32 x 1/4" Pointed Screws
[ ] One 10-32 x 1 3/4" Screw
