The MT-1 antenna bracket is designed to make your antenna
mounting convenient and incredibly strong. Made to clamp to
standard 1” pipe (1.312 OD) or bolted to a flat surface.
(Picture 6)
There are a few steps to make sure you
install the MT-1 antenna bracket the way it is
intended. First you need to install the upper
half of the quick disconnect in the bottom of
the antenna tight (Picture 7). Be sure to use
the lock washer
.
The MT-1 antennas bracket has 6 cutouts for the anti-
rotation rib that’s on the antenna. Be sure the rib goes
into one of these cutouts, there is no need to cut the
insulator, it will compress enough to tighten the antenna
down, (Picture 8)
Don’t forget to tighten down
the top half plate and the quick
disconnect. (Pictures 9 & 10)
Picture 7
Picture 8
Picture 6
Picture 9
Picture 10
