3
System Requirements
To use the mini hub, your computer must meet the following
hardware requirements and run one of the operating systems
listed below.
NOTES: The USB 2.0 Mobile Mini Hub is backward
compatible, so you can connect it to a computer with either a
version 1.1 or 2.0 USB interface.
When using the mini hub with a computer that has a version
1.1 USB interface, all of the devices attached to the mini hub
will run at a version 1.1 USB speed.
Connecting the Mini Hub to Your
Computer and Installing the
Default Device Drivers
To connect the mini hub to your computer and install the
operating system’s default drivers:
1 Plug the supplied high-speed cable’s USB connector end
(type A) into a USB port on your computer.
Hardware
Operating System
• PC with a 233 MHz or faster Intel
®
Pentium
®
processor or equivalent
and a hard disk drive
• Windows
®
98SE/Me/
2000/XP
• 64 MB RAM or higher, depending
on the operating system
• Mac OS X and higher
• USB version 2.0 interface
