Targus USB 2.0 Laptop Docking Station with Video
4
Installing the Device and Drivers
To use the Targus Docking Station, you must first install the driver
onto your computer. Then, connect the docking station to your
computer and Windows plug-and-play will install the hardware
drivers for each port.
WARNING: YOU MUST INSTALL THE DOCKING STATION SOFTWARE
BEFORE CONNECTING IT TO YOUR COMPUTER. OTHERWISE, THE
DOCKING STATION WILL NOT WORK PROPERLY.
Installing the Docking Station Driver
Installing the docking station driver enables your operating system
to recognize the docking station and its ports once it’s connected.
1 Turn on your computer.
2 Insert the driver software CD into your computer’s CD-ROM
drive.
If setup does not begin automatically, click Start, Run, and
enter D:\Setup.exe (where D: is the path of your CD-ROM
drive) and then click OK.
3 Follow any on-screen instructions to complete the installation.
4 Click Finish and restart your computer when prompted.