4
5
Attaching Your Handheld Computer
1.
Slide the dock all the way out of the keyboard until the rear support springs upward.
2.
Line up your handheld computer with the dock connector and push down gently to make
the connection.
Begin Typing
If you have installed the software according to instructions in the section
“Installing the Software,” you can begin typing right away.
Hint:
The first time you dock your Visor may be awkward. One suggestion is to
visually line the keyboard connector prongs to the Visor docking connector.
Another suggestion is to line up the bottom right corner of the Visor to the
center folding seam of the keyboard.
Closing the Stowaway
TM
Portable Keyboard
1.
Pull your handheld computer upward to remove it from the dock.
2.
Fold in the dock support, fold the dock flat, and slide it into the keyboard.
3.
With the unit still on a flat surface, grasp the red end-grips and slide the keyboard
sections apart to the ends of the case. Make sure to slide the keyboard sections as
wide apart as possible.
4.
Lift the keyboard and push up from under the center to form a “W” and then close.
5.
Press the four corners of the case together until they “click” into place.
Stowaway Keyboard Guide 3/3/00 6:55 PM Page 4
