4
Retracting the Cable
To store or transport the keypad or to use it as a calculator
independent of your computer, you can stow the cable and USB
connector in the back of the unit. To do this:
1 Unplug the USB connector from your computer’s USB port
(if connected).
2 On the back of the keypad, lift the wheel grip up.
3 Slowly turn the wheel in the direction of the arrows until the
cable is completely retracted.
4 Fit the USB connector back into its recess and press the wheel
grip down until it “clicks” into place.
Installing the Default Driver
After connecting the keypad to your computer, you are ready to
install the default driver supplied with the operating system. To do
this, follow the procedure listed below for your operating system.
Windows
®
98/Me Operating Systems
1 Turn on your computer.
The Add New Hardware Wizard appears.
If it does not, the operating system has installed the default
driver automatically. No other steps are necessary.
2 Click
Next
.
The locate driver screen appears.
3 Select “Search for the best driver for your device.
(Recommended),” and then click
Next
.
The wizard searches for the appropriate device driver.
4 Click
Next
.
5 Click
Finish
to complete the driver installation.
You are now ready to begin using your keypad.
