3
Connecting the Calculator Keypad
to Your Computer
1 Turn off your computer (if it’s turned on).
2 Remove the USB connector from its recess in the back of the
keypad and guide the cable through one of the three cable
grooves. Use the groove that is closest to your computer.
USB Calculator/Keypad - back view
3 Extend the cable to the desired length.
4 Plug the standard USB end of the cable (
) into an
available USB port on your computer.
You are now ready to turn on your computer and install the keypad
driver.
RESET
USB connector
recess
Cable
grooves
Cable
groove
Wheel
grip
