USB 2.0 Rewriteable DVD+/-RW 8x Double Layer Slim External Drive
Hot Swapping
You can connect and disconnect the Targus drive while the
computer is running. When connecting the Targus drive, first
connect the Type A connectors of the Y-cable and then connect the
Type B connector. When disconnecting the drive, disconnect the
Type B connector first, followed by both Type A connectors.
Writing and Rewriting CDs/DVDs
To write and rewrite CDs/DVDs, you must install writing software.
For your convenience, a CD/DVD writing application is supplied. To
install the CD/DVD writing software:
1 Insert the supplied CD-ROM into the Targus drive
(or your computer’s internal CD-ROM drive if it has one).
2 If setup does not begin automatically, click Start, then Run, and
enter D:\setup.exe (where D: is the path of the CD-ROM drive)
and click OK.
3 Follow the on-screen instructions to complete installation.
For more information on how to use the CD/DVD writing applica-
tion, refer to the documentation on the CD-ROM.
Things to Remember
Operating Hints
• Never press the eject button while the Targus drive is accessing a
disc.
• The Targus drive operates in either an upright or horizontal
position. To prevent possible damage, avoid changing the drive’s
position while it is in use.
• Avoid using or storing the Targus drive in extreme temperatures.
The environmental specifications while operating are 41-113
degrees F (5-45 degrees C).
• When traveling, allow the drive to reach room temperature before
using it.
6
