5
The Completing the Found New Hardware Wizard
screen appears.
2 Click
Finish
and repeat as needed for each device.
3 Restart your computer.
When your computer restarts, the port replicator/dock
should be completely configured.
LED Status Indicator Lights
Once all device drivers are installed, the LED status
indicator lights glow and you can connect devices to the
port replicator. The LED lights display as follows:
• Hub Link light blinks green.
• Serial light glows green.
• Each PS/2 light flashes green when a device is first
connected or there is activity on the port.
• USB lights glow green when a USB device is attached.
(Model PA095 only)
• Tx/Rx light flashes green when data is transmitted to or
from the network.
• 100M light glows green when connected to a 100 Mbps
network.
NOTES: The Ethernet port is compatible with 100 Mbps
networks. however, the actual throughput is 10 Mbps
maximum when connected to a USB v1.1 port due to the
bandwidth limitation. The throughput may decrease as
additional devices are attached to the port replicator
regardless of whether the port replicator is attached
to a USB 1.1 or 2.0 port.
