6
Disconnecting the Click N Type
To disconnect the Click N Type from your PDA:
1 Turn off your PDA (if it’s turned on).
2 Press the eject buttons, located on either side of the
keyboard, and gently pull your PDA away from the Click N
Type, sliding it out of the keyboard connector.
Using the Click N Type
NOTE: The Click N Type does not require batteries. Instead, it
runs off of a small amount of power, which it draws directly
from your PDA.
Enabling the Click N Type
After installing the driver and connecting the Click N Type to
your PDA, you can enable the keyboard through the main
application screen.
To enable the Click N Type, tap
Start
, then
Click N Type
.
