Target Port-A-Saw PS1411, Инструкция по эксплуатации и перечень запасных частей

Страница: 22 / 52

22
10 Accessories
The following accessories and kits are available for this
machine. See the Parts List section of this document for
the part number. For additional information contact your lo-
cal dealer or call our Toll free Customer Service Telephone
number shown on the front cover:
• Folding Stand Assembly
• Skid Kit
• Foot Pedal Kit
• Wheel Kit, Conveyor Cart (Set of 4)
• Adapter Cord, 115V, 15 Amp Straight To
20 Amp Twist-Lock (For 1-1/2 HP Motor Only)
• Water Pump Repair Kit *
• Conveyor Cart Kit, Complete *
• Ruler Set, Conveyor Cart *
* Note: This item has a different part number for the
electric and gasoline units.
11 Repairs
We carry out all repairs in the shortest possible time and at
the most economical prices. See front cover for our ad-
dress and telephone numbers.
The manufacturer accepts no
responsibility caused by unsuitable
use or modifications.
The instructions for use and spare parts found in this document
are for information only and are not binding. As part of our product
quality improvement policy, we reserve the right to make any and
all technical modifications without prior notice.
• Blade flanges must be full diameter - minimum of 4"
(100 mm). Replace worn flanges at once because
undersized flanges shorten blade life and cause blade
breakage.
• Check the conveyor cart condition on a regular basis.
Replace the wheels and the wooden insert frequently.
• Be certain the cutting head is correctly aligned. Blade
misalignment because of handling damage, or
transporting the saw with the cutting head on the frame
can seriously affect blade life.
• Replace noisy bearings immediately! Worn bearings
will quickly destroy the blade.
• Flush clean water through the pump and spray the
assembly after every job to prolong the pump and
blade life.
• Diamond blades may need to be “sharpened”. Blades
may be efficiently “dressed” with dressing sticks.
WARNING: Never use fire bricks to “sharpen”
or dress diamond blades!
• Abrasive blades must be a reinforced type. Never use
an abrasive blade with water. These products can be
damaged by operator abuse such as jamming the
material into the blade. This can also be hazardous!
For a quick supply of spare parts it is essential to quote the
data shown on the Serial Number Plate (TT) [FIG. 10] fixed
to the machine. Make note of this information below for
quick reference:
Reference Information
Model No:
Serial No:
Date Received:
NOTES:
12 Spare Parts