TARGET TECHNOLOGY DUAL-4000-ANZ, Инструкция по эксплуатации

Страница: 6 / 8

6
TROUBLESHOOTING.
GETTING FALSE ALARMS
•
Make sure that the Probe Sensors are at least 15m
from any main roads.
•
Check the wire for damage to the insulation.
•
If you hear a second alert 30 seconds after the first
alert, and nothing has activated the Probe Sensors
again, the batteries in the Transmitter Box are likely
low and should be replaced.
•
Try turning the sensitivity knob counterclockwise to
reduce the sensitivity.
TRANSMITTER NOT DETECTING
•
Change the batteries in the Transmitter Box.
•
Ensure that the Probe Sensors are coded to the
Receiver. See page 4.
•
Move the Transmitter Box closer to the Probe Sensors.
•
Check that the Transmitter Box is away from large
metal objects that may interfere with the radio signal.
•
Turn the sensitivity knob clockwise to increase the
sensitivity.
CONNECTING ACCESSORIES
If you have purchased the Alert Receiver Plus you are able
to connect additional accessories such as Sirens or Lights
to your kit.
Instructions on how to connect these accessories are
available on our website.