Targa Visionary LT-2010, Руководство пользователя

Страница: 18 / 36

17
After auto programming, the OSD Language menu should be showing on the screen.
Select OSD Language
English
Deutsch
Italiano
Spanish
Exit
Press the up/down button on the remote control to
choose the desired language. Then press ENTER /
MENU button to confirm.
NOTE :
Use the and to move between the options,
Press the Menu button again to confirm.
●
The above setting is only required for initial set up.
●
If you lose power after auto scan, press the Power button again.
●
If the initial setup has been done, you don’t have to do the above setting.
The other way to restart this initial setup is to choose the “Reset TV” option under the TV
setup menu, which can be found under the Main Menu Display.
TV and AV Operating Instructions
Press the Menu button to display the following Main Menu
：
Main Disp Operating Instructions
Level1 Level2 Level3 / Function
Main Disp TV 1. TV - TV Input Signal
Image Setup AV 2. AV - A-Video Input Signal
Audio Setup SV 3. SV – S-Video Input Signal
TV SETUP Y Cb Cr 4. Y Cb Cr - Component Input Signal
Language SCART AV 5. SCART AV
Recall
Press
SCART RGB 6. SCART RGB
Quit PC 7.PC – VGA Input Signal
Exit 8. EXIT - Back to Main Display
NOTE :
Use the and to move between the options,
Press the Menu button again to confirm.
The TV Setup option
will appear in the Main
Menu if a TV program
is accessed using the
Main Display or Sub
Display.