Targa TN700, Руководство пользователя, Страница: 38 / 154

1
2
3
4
5
6
7
8
2 – 6
S y s t e m
CD-ROM
I
NSERTING
& R
EMOVING A
CD-ROM
To insert a CD-ROM, follow these
steps:
1. With the notebook turned on, press the
button on the front of the module to re-
lease the spring-loaded tray.
2. Gently pull the tray out to its fullest ex-
tension.
3. Insert your CD-ROM shiny-side down
(like an audio CD).
4. Gently push the tray in until it clicks in
place. The CD-ROM is ready to play.
To remove the CD-ROM, press the
same button to release the tray.
If the notebook is turned off, you can
open the tray by inserting a probe (e.g.
a straightened paperclip) into the small
hole next to the button.
T
HE
CD-ROM
¯
CD-ROM Drivers
W
INDOWS
9
X
W
INDOWS
NT 4.0
W
INDOWS
NT 3.51
OS/2 W
ARP
These operating systems automatically detect
and configure an installed CD-ROM module.
DOS & W
INDOWS
3.1
X
If you’re using one of these operating systems,
you must manually install the CD-ROM driver:
1. Open the 24X directory on the floppy disk,
and type:
INSTALL.EXE
2. As each page appears, press Y or Enter to
confirm the settings.
If you don’t want to install the driver in the
default directory (C:\CDROM), when the
“Specify the directory...” dialog box ap-
pears, use Backspace to delete the current
name, then type in your preference. Re-
member to start the directory name with
C:\.
When you get to the “Specify the param-
eter...” page, make sure the ( )/D
[CDROM001] switch has an asterisk(*).
Then press Enter .
3. When the installation is complete, remove
the floppy disk and reboot your computer.
F
IG
. 2 – 5