Targa TN700, Руководство пользователя, Страница: 119 / 154

1
2
3
4
5
6
A
B
B – 7 display/operation
possible cause: The screen is suffering from burn-in.
indicator: The screen has ghost images, even when it’s off.
solution: This problem is usually associated with monitors. Use power
saving options (see Chapter 4: Firmware and Chapter 5:
Power ) to turn off the LCD. You can also use a screen-saver
which can help protect an attached monitor.
O
PERATION
The system gives you garbage when you try to read a hard disk from an-
other computer.
possible cause: The hard disk is not recognized.
indicator: The system cannot boot from the hard disk.
solutions: (a) The BIOS usually automatically detects the parameters
of the hard disk. However, it may occasionally detect a
different set of parameters. If the system cannot use the
hard disk, check the parameters of the hard disk in Setup .
Use the User option to manually adjust the parameters
if they are not the same as the original settings.
(b) The
Setup ’s Autotype Fixed Disk assumes that any hard
disk 528 MB or larger is formatted using “LBA” mode.
Some older systems don’t use LBA mode. If your hard
disk wasn’t formatted using LBA mode, you must enter
Setup ’s Fixed Disk Type section and manually adjust
the LBA Mode Control switch to “Disabled”. Since LBA
mode is the preferred standard, you may want to con-
sider reformatting your hard disk.