14
HDMI jack
You can connect an HDMI TV or monitor to this
recorder by using an HDMI cable.
1. Connect the HDMI OUTPUT jack of the recorder to
the HDMI input jack of your HDMI-compatible TV or
monitor (H).
Note: For further information, please check the
instruction manual of your screen. On the TV
screen you'll see the DVD player's start screen.
2. Set the TV's input source to HDMI (refer to the
User's Manual of your TV set).
Note: If your TV set does not feature any HDMI but
a DVI input jack, use an HDMI-to-DVI adapter cable
(not included in the package). Please note that
when using this type of connection, you must
further establish a separate audio connection via
the audio output jacks of your DVD-HDD recorder.
Notes:
If your TV is NOT capable of handling 96 kHz sampling
frequency, set the [Sampling Freq.] option to [48 kHz] on
the setup menu (See page 21). When this choice is made,
this unit will automatically convert any 96 kHz signals to 48
kHz so your system can decode them.
If your TV is not equipped with Dolby Digital and
MPEG decoder, set the [Dolby Digital] and [MPEG]
options to [PCM] on the setup menu (See page 21).
If your TV is not equipped with DTS decoder, set the [DTS]
options to [OFF] on the setup menu (See page 21).To
enjoy DTS multi channel surround, you must connect this
recorder to a DTS compatible receiver via one of this
recorder’s digital audio outputs.
The arrow on the cable connector body should face up for
correct alignment with the connector on the recorder.
If there is noise or lines on the screen, please check
the HDMI cable.
Tip :
When you use the HDMI connection, you can change
the resolution (576i, 576p, 720p, or 1080i) for the
HDMI output using RES. button.
Caution
Changing the resolution when the recorder is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
recorder and then turn it on again.
About HDMI
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD Players, Set-Top Boxes, and other AV
devices.
HDMI was developed to provide the technologies of
HDCP (High Definition Contents Protection). HDCP is
used to protect digital content transmitted and
received.
HDMI has the capability to support standard, enhanced,
or high-definition video plus standard to multi-channel
surround-sound audio, HDMI features include
uncompressed digital video, a bandwidth of up to 5
gigabytes per second, one connector (instead of several
cables and connectors), and communication between the
AV source and AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
Additional Information for HDMI
When you connect an HDMI or DVI compatible
device make sure of the followings:
- Switch off the HDMI or DVI compatible device and
this recorder. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds, then
switch on this recorder.
- The connected device’s video input is set correctly
for this unit.
- The connected device is compatible with
720(1440)x576i, 720x576p, 1280x720p, or
1920x1080i video input.
Not all HDCP-compatible DVI devices will work with
this recorder.
- The picture will not be displayed properly with
non-HDCP device.
Rear of the recorder
HDMI
HDMI compatible TV
H
(Type A)
Содержание DRH-5600x
Страница 64: ...63...
