Targa 106751, Руководство пользователя и сервисное руководство

Страница: 173 / 189

CR 1.0 A1
English - 171
Photo
In this mode your Dashboard Camera acts like a conventional digital camera that you can take
photos with. Further information can be found in the "Photo capture menu" section on page 176
and the "Taking photos" section on page 164.
1. Power the Dashboard Camera on by pressing and holding the On/Off button (14) for approx.
3 seconds.
2. If the Dashboard Camera is connected using the car charger, press the Return button (16) to
display the main menu. Otherwise, continue with step 3.
3. Press the + (18) or – (17) button several times to select the "Photo" function.
4. Press the OK button (12) to enable the camera function.
Motion Detection
Motion detection is a memory-saving alternative of having videos recorded automatically. This can
be useful, e.g. when you have parked your vehicle but still want any parking cars to be filmed in
case they dent your number plate with their tow bar while reversing.
Videos recorded via motion detection will be saved in folders named "
nnnn
EVEN" where
nnnn
is a
4-digit number.
1. Power the Dashboard Camera on by pressing and holding the On/Off button (14) for approx.
3 seconds.
2. If the Dashboard Camera is connected using the car charger, press the Return button (16) to
display the main menu. Otherwise, continue with step 3.
3. Press the + (18) or – (17) button several times to select the "Motion Detection" function.
4. Press the OK button (12) to enable motion detection.
Playback
You can play back your recorded videos and photos on the screen to check if the results are
satisfactory.
You can also play back the recorded videos on a computer or a television. See also
"Transferring recordings to a computer" on page 180 and "Viewing recordings on a
television" on page 180.
1. Power the Dashboard Camera on by pressing and holding the On/Off button (14) for approx. 3
seconds.
2. If the Dashboard Camera is connected using the car charger, press the Return button (16) to
display the main menu. Otherwise, continue with step 3.