TY-99001 Pneumatic Tapper
•
Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not
covered by warranty or product liability.
•
When cleaning mechanical parts with solvent, comply with appropriate health and safety regulations
and ensure there is satisfactory ventilation.
•
For major service to the machine, contact your nearest authorized workshop.
•
After each service, check that the machine's vibration level is normal. If not, contact your nearest
authorized workshop. For more information, contact Tarboya.
Every day
Before undertaking any maintenance or changing a Tap on the Tapper, always switch o
ff
the air supply,
bleed the machine by depressing the start and stop device, and disconnect the air hose from the
machine.
•
Clean and inspect the machine and its functions each day before the work commences.
•
Conduct a general inspection for leaks and damage.
•
Check that the air inlet nipple is tightened and that the claw coupling is free from damage.
•
If the machine has a vibration-reducing handle, check that it is moving freely (up and down) and does
not jam.
•
Change damaged parts immediately.
•
Replace worn components in good time.
•
Make sure that all the attached and related equipment, such as hoses and water separators, are
properly maintained.
Periodic maintenance
•
After each operating period of approximately 100 hours or three times a year the machine must be
dismantled and all parts be cleaned and checked. This work must be performed by authorized sta
ff
,
trained for this task.
Storage
•
Clean the machine properly before storage to avoid hazard substances.
•
Always store the machine in a dry place.
Disposal
•
A used machine must be treated and disposed of in such a way that the greatest possible portion of the
material can be recycled and any negative influence on the environment is kept as low as possible, and
in respect to local restrictions.
Parts
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and
parts be separated by material so that they can be recycled.
•
Tool repair and maintenance should only be carried out by an authorized Service Center.
•
Refer all communications to Tarboya.
Related Documentation
For additional information refer to:
TY-99001 Pneumatic Tapper Passport #9941226.
It can be downloaded from
9941226 | TY-99001 Passport
/
9 9
Tarboya Pneumatic T
ools Co.,Ltd.
