OWNER'S MANUAL
ARS.1
If the system has been triggered (shock sensor, door input..), the siren will sound for
approximately 60 seconds. Press and release the lock or unlock button to silence the
siren (the system will remain armed). Press the unlock button to disarm the system. The
siren will chirp and the park lights will flash three times to indicate the system had been
triggered.
If the shock sensor is triggered 3 times in a row the system will ignore the shock sensor
until the ignition is turned cycled on then off.
The shock sensor sensitivity is set at the time of installation. The adjustment screw on the
sensor will increase or decrease the sensitivity. The first and second stage are controlled by the
same adjustment screw.
Test the alarm sensitivity then adust as required. If the alarm is triggered 3 times in a row you
will need to cycle the ignition on then off to reset the shock sensor before testing again.
NOTES
Adjustment Screw
Zone LEDs
Mounting Bracket
