Tarana G1 RN, Руководство пользователя

Страница: 13 / 16

Tarana Wireless, Inc. Proprietary and ©2021. All rights reserved. vG1-RN-2021-01 G1 RN Manual — 12
Wall or Surface Mounting the Elevation Bracket
Step 1. Using the elevation bracket as a template, mark the location of the 4 holes
at each corner of the bracket with the bracket oriented in the direction
depicted.
Step 2. Suitable fasteners 7mm or 8mm (not included) in diameter can be used
with the bracket without issue. Do not attempt to use fasteners smaller
than 6mm and never modify the elevation bracket by drilling for larger
than 8mm fasteners as it will damage the corrosion protection of the
finish.
Step 3. Install the elevation bracket with its elevation tabs facing outward and
oriented as shown.
Pole Mounting the Elevation Bracket
Step 1. Route the opened screw clamps through the Wall/Pole bracket so that the
serrated surfaces of the bracket will be facing the pole and the clamps will
go around the pole.