Index
07
This warranty excludes:
•Damaged products by improper installation, water infiltration, violation by unauthorized individuals;
•Tamper or torn warranty seal;
TARAMPS, located on Abilio Daguano Street 274, Res. Manoel Martins – Alfredo Marcondes, SP - Brazil, ZIP
CODE 19180-000, guarantees this product against any defects on terms of project, making, assembling, and/or
with solidarity, due to project vices which cause it improper or inadequate to its original use within
•Cases in which the product is not used in adequate conditions;
•Defects caused by accessories, modifications or features attached to the product;
12 months from the date of purchase. In case of defect during the warranty period, TARAMPS responsibility is
limited to the repairing or substitution of the device of its own making.
•The product with damage from falling, bumps or nature related problems (flooding, lightning, etc.);
•Warranty card is not properly filled or torn;
•Damage of any kind, due to problems in the product, as well as losses caused by discontinued use of the
product.
•Costs involving uninstallation, reinstallation of equipment as well as shipment to the factory;
Term of warranty
•Technical assistance
08 •
Introduction
• Smart Bass line presentation
07 •
Term of warranty
•
Smart line presentation
•
Key recommendations
11•
Installation
•
Recommended wire gauge & fuse
12 •
Technical features
09 •
Functions, inputs & outputs
10 •
Power supply connector
•
LEDs indicators & protection system
ENGLISH
Technical assistance
www.taramps.com.br/en/rede-de-assistencias-tecnicas
Phones: +55 18 3266-4050 / +55 18 99749-3391
For international support, check on our website:
or contact direct the factory support:
E-mail:
Smart Bass Line Presentation
Multi-impedance:
Featuring new control technology and new functions, the SMART 5 BASS has 5000W
RMS rated power in the range of 0.5 to 2 Ohms: (0.5 - 1 - 1.33 - 1.5 - 1.67 and 2 Ohms with same power);
SMART LEDS:
LEDs output signal level indicator on top of product;
RCA input for up to 4V RMS:
Input gain adjustment that allows head units up to 4V RMS output level;
Dual RCA IN / OUT Input:
RCA connector with input and output function, eliminates the needing of “Y”
cables for send the same unput signal to another amplifier;
Power connector for cables up to 2/0 AWG:
Allows the use of power cables with larger gauge (up to
70mm²) for higher performance;
AUTO-Restart Protections:
The amplifier automatically restarts after a protection event;
RAMP audio initialization:
After turning on the amplifier, audio is released gradually (ramp).
