Taramps PRO CHARGER 250A, Инструкция по эксплуатации

Страница: 12 / 14

11
Use of parallel power supply
Battery charger & amplifier power
Many power supply/battery charger can be used in parallel mode. The output voltage of all power
supply/battery charger must be at the same output voltage of the Pro Charger 250A. First ajust the
voltage of all power supply/battery charger and then do the connections.
The maximum output current will be the sum of each power supply/battery charger. Example: 2 power
suplly/battery charger Pro Charger 250A will supply 500A of total current.
(**) Use individual AC Power Input as recomendated for each power supply/battery charger.
(*) Use circuit breaker like indicated for each power supply/battery charger.
In this case, beside charging the batteries, the Pro Charger 250A will assist the batteries in the power
supply of the amplifier.
The battery charger system don´t damage the bateries,
seeing that when the battery reaches the voltage set, they
will go into floating voltage.
(*) See recommended circuit breaker for your power
suplly/battery charger.
(**) See recommended circuit breaker by amplifier manual.
CIRCUIT BREAKER
CIRCUIT BREAKER
AMPLIFIER
AMPLIFIER
Illustrative Images
Illustrative Images