![Taramps Homee Life Sound THS 4600 Скачать руководство пользователя страница 21](http://html.mh-extra.com/html/taramps-0/homee-life-sound-ths-4600/homee-life-sound-ths-4600_instruction-manual_818862021.webp)
Technical features
TARAMPS THS 4600:________________________
Number of Channels:_______________________
RMS Power:_______________________________
Nominal RMS Power of each channel:__________
RMS output voltage for each channel:_________
Total Harmonic Dist Noise (THD + N) at the
nominal power of each channel (125W)________
Each channel nominal Impedance:____________
AUX input Sensitivity:______________________
AUX input impedance:______________________
MIC input impedance:______________________
MIC Sensitivity:____________________________
Typical 3-way equalizer performance:
:
Frequency response (equalizers at 0dB):________
Low (bass):______________________________
High (high):______________________________
Mid (mid bass):____________________________
Weight:__________________________________
Maximum consumption:____________________
Ratio signal/noise:_________________________
FM frequencies:___________________________
Protection System:________________________
Dimensions:______________________________
Consumption in Stand by:___________________
Internal protection fuse:____________________
Power Supply:____________________________
Taramps reserves the right to modify the contents of this manual without prior notice and not to apply the
modifications to units previously produced.
20
250W (125W + 125W)
ABNT NBR IEC 60268-3*
125W
22.4Vrms
±12dB - 80Hz
±12dB - 10KHz
Receiver Multi Channel Class D
02
<3%
4 Ohms
10mV
200mV
2,2K Ohm
2,2K Ohm
15Hz ~ 20KHz (-3db)
±12dB - 2KHz
320W
90 ~ 140V AC or 190 ~ 240V AC
3.5W
6A
Output protection against short-circuit
and low impedance**
1.97Kg ( 4.33lb)
87.5 MHz ~ 108MHz
>70db
386 x 59 x 180mm (15.20" x 2.32" x 7.09")
** Protection system on page 15.
The values mentioned are typical and may change due to the tolerance of components or the manufacturing process.
* Nominal power with 1KHz sinusoidal signal and 4 ohms resistive load. (Measured according to ABNT NBR IEC 60268-3
sound equipment, Part 3: Amplifiers).
For more information or questions visit our website or contact TARAMPS support.