Output & power supply connector
POWER
SPEAKER
BRIDGED 4
2
2
2
2
1
2
Short-circuit Protection:
Shutdown the amplifier when detect a short- circuit or impedance
lower than the supported at the output.
4 OHMS
4 OHMS
Resulting
impedance:
2 OHMS
Stereo Connection = 2 ohms
For STEREO connections, the minimum impedance is 2 ohms at each channel; for BRIGDED
connections is 4 ohms.
2 -
POWER (Power Supply Connector):
The connector terminal (+) must be connected to the
battery's positive pole with a 16mm² (minimum) wire gauge. The connector terminal (-) must
be properly connect to the battery's negative pole with a same wire gauge. The remote
terminal must be connected to the Head Unit REMOTE output with a 0.75mm² wire.
To combine speakers, the resulting impedance must be taken in consideration.
See the examples below:
1 -
OUTPUT:
To connect the speakers. Follow the polarity and the minimum impedance
recommended.
10
Protection system
8 OHMS
8 OHMS
Resulting
impedance:
4 OHMS
Bridged Connection = 4 ohms
Due to the presence of voltage at the output terminals when the product is turned on,
avoid contact with them. Risk of electric shock.
CAUTION
Before making any connections to the power terminals, make sure that the negative (-)
of the vehicle battery is disconnected.
CAUTION
