Technical features
**Frequency response measured at 2 times the minimum impedance, in 4 simultaneous loads..
*Rated power with 40Hz to 1KHz sinusoidal signal and THD <= 1%, with resistive loads, measured with Audio
Precision APx525 audio analyzer or equivalent and the product at lower than 50°C case temperature and 14.4V
supply voltage.
The values as above are typical and may vary, due to electronic components tolerance or manufacturing process.
For further informations or questions, visit our website or contact TARAMPS support.
14
4000W RMS
(4 x 1000W RMS)
2500W RMS
(4 x 625W RMS)
04
2400W RMS
(4 x 600W RMS)
4000W RMS
(4 x 1000W RMS)
4000W RMS
(2 x 2000W RMS)
1 Ohm 2 Ohms
4000W RMS
(2 x 2000W RMS)
250mV (RCA) / 3V (WIRE)
4V (RCA) / >10V (WIRE)
8Hz ~ 20KHz (-3dB)**
90Hz (-12dB/8ª) Fixed
90Hz (-12dB/8ª) Fixed
Output overload
2.5A 2.8A
185A 160A
17VDC
370A 320A
>86dB
268 x 72 x 333mm (10.55" x 2.83" x 13.11")
5.06Kg (11.13lb)
9VDC
Minimum Output Impedance:
Number of Channels:
Output Power @14.4VDC
1 OHM:
2 OHMS:
4 OHMS:
2 Channels in Bridged - 4 OHMS:
2 Channels in Bridged - 2 OHMS:
RCA Input Sensitivity (Gain = Max):
HPF (High Pass Filter):
Minimum Supply Voltage:
Maximum Supply Voltage:
Signal- to-noise Ratio:
Rated Power Consumption:
Dimensions (W x H x L):
LPF (Low Pass Filter):
Weigth:
Protection System:
WIRE Input Sensitivity (Gain = Min):
Idle Consumption:
Musical Consumption @14.4VDC:
Crossover
Frequency Response (Full Range):
