Functions, inputs & outputs
3 - MONITOR LEVEL REMOTE:
Connection for the LED Monitor accessory, whose function is to
monitor the amplifier, informing clipping and activation of protections and also for the Monitor
level Remote which monitors the above functions and controls the volume of the amplifier.
(Accessory not included).
See the examples below:
5 - SMART COOLER:
This amplifier has two internal ventilation fans. For perfect functioning, the
amplifier must be installed in a cool and aired place with at least 1” (25mm) space around the
heatsink for proper heat spreading. The usually working temperature of amplifier is 70°C (158°F).
1 - L/R:
Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit , using
good quality shielded cables to avoid noise influence.
2 - GAIN:
Adjusts the input sensitivity of the amplifier, allowing a perfect adjustment to the output
signal levels of various head units models on the market. It is possible to adjust from 4V (minimum
sensitivity) to 0.2V (maximum sensitivity).
To combine speakers, the resulting impedance must be taken into consideration.
4 - SPEAKER:
Output (positive and negative) to transducers connection (speakers). Follow the
polarity described and the minimum impedance recommended.
4 OHMS
4 OHMS
Resulting
impedance:
2 OHMS
Amplifier 2 OHMS
2 OHMS
2 OHMS
Resulting
impedance:
1 OHM
Amplifier 1 OHM
09
Due to the presence of voltage at the output terminals when the product is turned on,
avoid contact with them. Risk of electric shock.
CAUTION
The fan and ventilation openings are responsible for cooling the amplifier when it is in
use, so it cannot be obstructed.
CAUTION
2
1
3
5
5
4
