Tar River RONDINI SQFT, Руководство оператора и каталог запасных частей

Страница: 10 / 22

9
The working speed depends on ground conditions. Only a test run will enable you to gauge the optimal
working speed for your conditions.
Optional Filter
The filter grate is a simple bolt-on accessory available for pendular spreader models and is ideal for filtering
clots and foreign objects from the material being spread.
Optional Agitator
The agitator extension accessory available for all pendular spreader models is best suited when powdered or
high humidity fertilizer is being spread. This type of material tends to bridge in the hopper. The agitator extension
is assembled on the existing agitator using the supplied spring. Important: Heavy clods such as compacted salt
must be broken up before being used in the spreader.
Optional Sand & Salt
The sand & salt spout is available for all pendular spreader models and is used to cut the spread width in
half. To assemble standard spout must be removed and sand & salt spout is bolted on in its place .
Optional Rubber Insert
The rubber insert is available for all pendular spreader models and is used when spreading high moisture product
such as damp fertilizer or peat. The rubber insert provides a high viscosity surface that lets humid material flow
through the spout better.
Optional Hydraulic Gate
The hydraulic gate control available for pendular spreader models allows operator to control the opening and
closing of the gate using the tractors hydraulic system.
Optional Left/Right Directional
Although the standard spread deflector can be adjusted to spread only to the left or only to the right, the
optional directional attachment improves accuracy when spreading in either direction. To assemble, unscrew
the standard spread deflector and screw in the Left/Right directional attachment. It fits all models of
pendular spreaders.
Spreading Charts
The graded scale comprises three lines of holes marked with letters R, S, T. Each line consists of nine holes,
which are out of line with the holes of the previous line by half a diameter. This system allows simple but effective
adjustment with twenty-seven different fertilizer quantity settings. The spread tables in the following pages will
help you determine what setting to use according to the type of product you are spreading. The figure below
illustrates the hole selection for “4S