11
11
To Set the Minute Timer:
1. Press
.
2. Press the
to increase the time in one minute
increments. Press and hold the
to increase the
time in 10 minute increments. The timer can be set for
any amount of time from 1 minute to 11 hours and 59
minutes.
Note:
If the
pad is pressed first, the timer will
advance to 11 hours and 59 minutes.
3. The display shows the timer countdown in minutes
until 1 minute remains. Then the display will
countdown in seconds.
4. When the set time has run out, the timer will beep 3
times. it will then continue to beep 3 times every 60
seconds until
is pressed.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press
and hold the
or
to increase or decrease the time.
To Cancel the Minute Timer before the set time has
run out:
Press
.
To turn the
time of day
display
OFF
or
ON
in the display
press
and hold for 15 seconds (the control will beep
once) and then release. This feature does not remove the
set time of day from the memory of the control. When the
display is turned OFF the time of day will re-appear for a
few seconds any time the
pad is touched.
NOTE
SETTING OVEN CONTROLS
NOTE
The indicator light located above the
pad will
glow while the minute timer is active.
The minute timer does not start or stop cooking. It
serves as an extra timer in the kitchen that will beep
when the set time has run out. The minute timer
can be used alone or during any of the other oven
functions. When the minute timer is in use with any
other function, the minute timer will be shown in the
display. To view other functions, press the pad for
that function.
To Set or Change the Temperature for
Baking
The oven can be programmed to bake at any temperature
from 170°F to 550°F (77°C to 287°C).
To Set the Controls for Baking:
1. Press
. “— — —” appears in the display.
2. Within 5 seconds, press the
or
. The display will
show “350°F (177°C).” By pressing and holding the
or
, the temperature can then be adjusted in 5°F
increments (1°C if the control is set to display Celsius).
3. As soon as the
or
pad is released, the oven
will begin heating to the selected temperature. When
the displayed temperature reaches the desired baking
temperature, the preheat indicator light will turn OFF
and the control will beep 3 times.
4. To cancel baking, press
.
To Change the Oven Temperature after Baking has
Started:
1. Press
and make sure the bake temperature is
displayed.
2. Press the
or
pad to increase or decrease the
set temperature.
To Set Control for Continuous Bake or 12
Hour Energy Saving
The oven control has a built-in 12 Hour Energy Saving
feature that will shut off the oven if the control is left on
for more than 11 hours and 59 minutes. The oven can
be programmed to override this feature for continuous
baking.
To set control for continuous baking:
1. Press and hold
down for 5 seconds until tone is
heard, “
— — hr
” will appear in display for continuous
cooking. The current time of day will return to the
display.
2. To cancel the Continuous Bake function, press
and hold for 5 seconds until tone is heard. “
12hr
”
will appear in display indicating that the control has
returned to the 12 Hour Energy Saving feature.
